One of the first things the do-it-yourselfer realizes when learning how to build a drywall ceiling is that no man is an island – unless he uses rented equipment!

Because the panels are big, bulky, and awkward, hanging drywall on a ceiling entails one or the other: the help of another person or renting a drywall jack from your local home improvement center.

The cable mechanism on drywall jacks is not difficult to operate, and jacks do an excellent job of holding the drywall in a secure, flat position enabling you to more easily attach it to the ceiling.

Tools & Materials

How to build a drywall ceiling includes knowing what all tools and material you’ll need. In addition to either another person to help you or a drywall jack, you’ll also need a hammer, a drill with a screwdriver bit, and nails or screws for drywall. You’ll also, of course, need to measure your ceiling (twice!) and purchase enough drywall, including a little extra in case of mistakes, to do the job.

Mark Joists First

Find the boards – usually 2x4s or 2x6s – that function as ceiling joists by tapping along the wall studs with a hammer and following up the wall to the ceiling. As part of learning how to build a drywall ceiling, mark where these boards are located with a pencil. These are what you will be attaching the drywall to and marking them beforehand makes it much easier to find them than trying to find them as you are nailing or screwing on the drywall. You then need to measure where the light fixture goes on the drywall and cut out a hole to accommodate that area of the ceiling.

The Tough Part

Now’s the part in learning how to build a drywall ceiling where you’ll need the other person (who hopefully has plenty of stamina in addition to strength!) to hold the drywall up to the ceiling or to put the drywall panel on the jack. Position the end of the sheet of drywall – with its finished side facing down – at the center of the ceiling board (joist) to which you are going to nail it. Nail around the outside of the panel about a half an inch from the edges to prevent the drywall from splitting or cracking. The person who is holding the panel can now move or, if you’re using a jack, you can move it out of the way.

Make It Pretty

Countersink nails or screws at six- or seven-inch intervals all along the length of the joist to which the drywall has been attached. Countersinking allows you to cover up the heads of the nails/screws with compound so that when you paint, the heads won’t be at all visible. Although not really a part of knowing how to build a drywall ceiling, learning how to cover up ugly nail or screw heads serves its own purpose for overall general carpentry knowledge.

Learning how to build a drywall ceiling takes a lot more muscle than to attach the sheets to the walls, but it can be done with a little thought, at least one other person, and/or a jack. It really is pretty hard work, but, hey, after all – you can do anything, right?

Having trouble with your drywall project? Discover the top ten drywalling tips at http://www.onlinetips.org

Author: Carlo Morelli
Article Source: EzineArticles.com
Digital economy, mobile technology

The plasterboard in many Australian homes harbours imperfections that can cause major problems for homeowners down the line. That’s why it’s so vital to have a professional inspect the premises before signing a contract to buy a home.

The Basics Of Plasterboard -

Plasterboard is used in a variety of buildings, including homes, shops, offices, factories, schools and many other places. During construction, it is used as a type of internal lining board to help create strong, smooth, uniform looking walls and ceilings. Generally builders prefer using plasterboards in houses as its surface can be easily decorated using either paint or wallpaper. Most houses use plasterboard to some degree; unfortunately, this material can also harbour many unpleasant problems. If you’re buying a new home and are unsure of whether or not plasterboard is involved – and whether or not the plasterboard that’s there is of sound quality – you need the experts to take a look.

The Problem With Plasterboard -

Cracks are one of the biggest problems that occur with plasterboard. When cracks appear in plasterboard, they typically occur wherever there is a change in direction; hallways and ceilings in particular are common areas for cracks in plasterboard. Gypsum wallboard is one of the most commonly used varieties of plasterboard, and changes in temperature and/or moisture can cause stress and movement within it. That stress and movement can cause cracks; over time, those cracks can create a major headache for homeowners and can precipitate massive repairs.

Preventing Cracking -

Control joints are the preferred method for preventing cracking in plasterboard and gypsum wallboard. When used properly – and spaced apart appropriately, at approximately 9 metres from floor to ceiling – control joints can prevent cracks and plasterboard doesn’t pose a major problem. However, many houses weren’t built properly in the first place; sometimes, do-it-yourselfers fail to use control joints the right way, and plasterboard is compromised. A skilled building inspector can look at the walls and ceilings in any house and determine whether they have been put together properly. In addition to looking for existing cracks, then, an experienced inspector can look for the warning signs of trouble down the road and can help you avoid major headaches and expense later.

alternatives to plasterboard?

Hallo everyone, I am in the development stage of building a new house for our family. I have a dislike for plasterboard, i have to work with it in the building trade and it drives me mad. I do…   Read more…

Lafarge Plasterboard appoints new technical manager

Lafarge Plasterboard has appointed Julien Soulhat as technical manager.   Read more…

AT-Linz: plasterboard works – dgMarket – Tenders and consulting …

dgMarket is the largest international portal for tenders and procurement opportunities from governments and international organizations.   Read more…